Helical Solutions Video 316 Stainless Running at 150 IPM
This was cut with our HSVR-R-40375-R-3. It's dimensions are 3/8 x 3/8 x 7/8 loc x 3 oal. It is a 4 flute, variable, high performance carbide end mill with AlTiN coating. It ran at .750 depth of cut, .094 width of cut, 768 surface feet per minute, 7823 revolutions per minute, .0048 chip load per tooth, and 150 inches per minute.
To download this video, please right click on the icon below for the format you would like it in and choose 'Save Target As':
Windows Media Player
Quicktime
Helical Solutions Video 303 Stainless Running at 100 IPM
This was cut with our HSVR-R-40375-R-3. It's dimensions are 3/8 x 3/8 x 7/8 loc x 3 oal. It is a 4 flute, variable, high performance carbide end mill with AlTiN coating. It ran at .750 depth of cut, .094 width of cut, 780 surface feet per minute, 7945 revolutions per minute, .0031 chip load per tooth, and 100 inches per minute.
To download this video, please right click on the icon below for the format you would like it in and choose 'Save Target As':
Windows Media Player
Quicktime
Helical Solutions VoluMill Video 1045 HH Steel (28rc) Running at 313 IPM and 192 IPM
The first tool cutting was our HSVR-C-R-40500-R-3. It's dimensions are 1/2 x 1/2 x 1-1/4 loc x 3 oal. It is a 4 flute, variable, high performance carbide end mill with AlTiN coating. It ran at .500 depth of cut, .125 width of cut, 1467 surface feet per minute, 11200 revolutions per minute, .007 chip load per tooth, and 313 inches per minute. The second tool cutting was our HSVR-C-R-40375-R-3. It's dimensions are 3/8 x 3/8 x 7/8 loc x 3 oal. It is a 4 flute, variable, high performance carbide end mill with AlTiN coating. It ran at .500 depth of cut, .0937 width of cut, 1100 surface feet per minute, 11200 revolutions per minute, .004 chip load per tooth, and 192 inches per minute. The material being cut is 1045 Half Hard (28rc) Steel.
To download this video, please right click on the icon below for the format you would like it in and choose 'Save Target As':
Windows Media Player
Quicktime
Helical Solutions VoluMill Video 6061 Aluminum Running at 500 IPM
This was cut with our HAL-C-R-30500-R-0. It's dimensions are 1/2 x 1/2 x 1-1/4 loc x 3 oal. It is a 3 flute, aluminum geometry, high performance carbide end mill. It ran at 1.000 depth of cut, .200 width of cut, 2356 surface feet per minute, 18000 revolutions per minute, .00925 chip load per tooth, and programmed feedrate of 500 inches per minute.
This was done at the Connecticut Center for Advanced Technology.
To download this video, please right click on the icon below for the format you would like it in and choose 'Save Target As':
Windows Media Player
Quicktime
Helical Solutions VoluMill Video 6061-T6 Aluminum Running at 900 IPM
This was cut with our HAL-C-SR-30500-R-0. It's dimensions are 1/2 x 1/2 x 1 loc x 3 oal. It is a 3 flute, aluminum geometry, high performance carbide end mill. It ran at .500 depth of cut, .200 width of cut, 1560 surface feet per minute, 12000 revolutions per minute, .025 chip load per tooth, and programmed feedrate of 900 inches per minute.
To download this video, please right click on the icon below for the format you would like it in and choose 'Save Target As':
Windows Media Player
Quicktime
Helical Solutions Video 17-4 PH Running at 80 IPM
This was cut with our HEVR-R-50500-R-3. It's dimensions are 1/2 x 1/2 x 1-1/4 loc x 3 oal. It is a 5 flute, variable, high performance carbide end mill with AlTiN coating. It was ran at .500 depth of cut, .0625 width of cut, 780 surface feet per minute, 6000 revolutions per minute, .0026 chip load per tooth, and 80 inches per minute.
To download this video, please right click on the icon below for the format you would like it in and choose 'Save Target As':
Windows Media Player
Quicktime
Helical Solutions Volumill 6061 Aluminum Running at 500 IPM #2
This was first cut with our HAL-C-R-30500-R-0. It's dimensions are 1/2 x 1/2 x 1-1/4 loc x 3 oal. It is a 3 flute, aluminum geometry, high performance carbide end mill. It ran at 1.000 depth of cut, .200 width of cut, 1950 surface feet per minute, 15000 revolutions per minute, .011 chip load per tooth, and feedrate of 500 inches per minute. The second cut was our HAL-C-RN-M-30500-R-0. It's dimensions are 1/2 x 1/2 x 5/8 loc x 2-1/4 lbs x 4 oal. It is a 3 flute, reduced neck aluminum geometry, high performance carbide end mill. It ran at .500 depth of cut, .200 width of cut, 1950 surface feet per minute, 15000 revolutions per minute, .011 chip load per tooth, and feedrate of 500 inches per minute.
To download this video, please right click on the icon below for the format you would like it in and choose 'Save Target As':
Windows Media Player
Quicktime
Helical Solutions Volumill 4140 Running at 250 IPM
This was cut with our HEVR-R-50500-R-3. It's dimensions are 1/2 x 1/2 x 1-1/4 loc x 3 oal. It is a 5 flute, variable, high performance carbide end mill with AlTiN coating. It first ran at .500 depth of cut, .030 width of cut, 1300 surface feet per minute, 10000 revolutions per minute, .005 chip load per tooth, and 250 inches per minute. It then ran at 1.000 depth of cut, .030 width of cut, 1300 surface feet per minute, 10000 revolutions per minute, .005 chip load per tooth, and 250 inches per minute.
To download this video, please right click on the icon below for the format you would like it in and choose 'Save Target As':
Windows Media Player
Quicktime
